CRYLINK high power laser linearly polarized beam splitter cube consists of two ultraviolet fused quartz right angle prisms, one with an antireffective film on its bevel, the other with a precise polishing on its bevel, both with antireflective film on its right edge, and finally the bevel is bonded by a photoglue process.A prism with a black dot at the top of the high power laser linearly polarized beam splitter cube indicates that its slope is coated with a dielectric polarized beam splitter which reflects S polarized light and passes through P polarized light. For the best polarization performance, it is recommended that the incoming light be incident from the right edge of the prism with a polarized splitter film.The extinction ratio (Tp:Ts) of the high power laser linearly polarized beam splitter cube is greater than 2000:1, and all four light-passing surfaces are coated with V-type antireflective film designed for single wavelength, with reflectivity less than 0.25%.CRYLINK offers 12 working wavelengths of 266, 355, 405, 532, 633, 780, 808, 830, 850, 1030, 1064 and 1550 nm. CRYLINK mounts a 25.4 mm high power laser linearly polarized beam splitter cube in a 30 mm coaxial system compatible cube housing with a top notched direction indicating the direction of the light path. The side of the housing provides M3 threaded holes, which are compatible with a 30 mm coaxial system.In addition, there are four SM1 internal threaded ports on the side of the housing, which are compatible with 25.4 mm lens sleeves at the same time.There are also M4 threaded holes at the bottom of the coaxial cube for mounting the connectors.CRYLINK can also provide special customization services for other design wavelengths and sizes, if needed, please contact technical support.
|Material||UV Grade Fused Silica|
|Flatness of plane（@633nm）||λ/10|
|AR coating||V-AR coating，Ravg <0.25a@working wavelength|
- Separation of p-polarization and s-polarization
- High extinction ratio
- Glue-free optical path
- High damage threshold